Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Bumper from a Nissan Micra K14

Model: Nissan Micra K14 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Rear bumper

See other generations:
Video tutorial

To remove the rear bumper from the Nissan Micra K14, you must first remove the rear lights: unscrew the visible bolts inside the boot and pull out the light, which is held by two clips; disconnect the electrical connector. In the wheel arch, remove the butterfly screws, while under the bumper in the centre there are more clip hooks along the lower edge.

In the space left by the lights, you will have access to a 10 mm bolt that secures the bumper laterally, and some clip hooks, known as "popper"; to detach them, simply press the central tab or pull the bumper laterally outward. Now the bumper is only held by clips along the upper edge.

Grasp it at the sides and pull it straight towards you, firmly but without yanking. Disconnect the parking sensor connectors first.


Posted on 13 April 2026 by ScegliAuto


Related tutorials

Where is the fuse box located in the Nissan Micra K14?
Where is the fuse box located in the Nissan Micra K14?
Nissan Micra (2017-2024 / K14) Here is an example of work carried out inside the Nissan Micra K14, which actively involves the fuse box. In the video presented above, the installat…
How to Reset the Tyre Warning Light on the Nissan Micra K14?
How to Reset the Tyre Warning Light on the Nissan Micra K14?
Nissan Micra (2017-2024 / K14) If you have just inflated the tyres of your Nissan Micra K14 (2017-2023) or replaced one due to a puncture and want to manually reset the warning lig…
How to Replace the Cabin Filter on the Nissan Micra K14
How to Replace the Cabin Filter on the Nissan Micra K14
Nissan Micra (2017-2024 / K14) To replace the cabin air filter in your new Nissan Micra K14 (2017-2023) yourself, follow these steps. First, enter the car and reach the passenger s…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos