Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Fan Resistor on the Nissan X-Trail?

Model: Nissan X Trail MK 3, T32 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Blower motor

See other generations:
Video tutorial

You can replace the cabin fan resistor on the Nissan X-Trail by opening the glove compartment on the passenger side: this can then be freed from the corresponding screws and removed from its location to access the components at the back. The fan resistor will be located right at the back and can be freed from the corresponding screws as well as the cables: now you can position the new resistor in its place to ensure everything functions correctly.


Posted on 25 August 2026 by ScegliAuto


Related tutorials

Removing the Cabin Fan on Nissan X-Trail
Removing the Cabin Fan on Nissan X-Trail
Nissan X Trail (2001-2006 / MK 1, T30) .. the cabin fan from a first-generation Nissan X-Trail by following the instructions below. First, get inside the car and remove the glove compartment;.. …
Disassembly of the cabin fan of the Nissan X-Trail
Disassembly of the cabin fan of the Nissan X-Trail
Nissan X Trail (2007-2014 / MK 2, T31) .. and replacing the cabin fan of the Nissan X-Trail. First, we climb aboard the cabin and begin to disassemble and remove the glove compartment; then.. …
Replacing the Cabin Fan Resistor on Nissan X Trail
Nissan X Trail (2001-2006 / MK 1, T30) .. To access the cabin fan resistor on Nissan X Trail T30 and replace it, simply remove the panel beneath the glove compartment by pulling it off by.. …

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos