Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the cabin fan of the Nissan X-Trail

Model: Nissan X Trail MK 2, T31 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Blower motor

See other generations:
Video tutorial

The instructions provided in this guide will show us the procedure for disassembling and replacing the cabin fan of the Nissan X-Trail. First, we climb aboard the cabin and begin to disassemble and remove the glove compartment; then we unscrew the screws we find on the top to remove the compartment, as shown in the video.

At this point, we find the cabin fan located on the back; we unscrew its fixing screws and disconnect the electrical connector to remove it, replacing it with the new one; let's check its operation before reassembling everything.


Posted on 20 December 2024 by ScegliAuto


Related tutorials

Removing the Cabin Fan on Nissan X-Trail
Removing the Cabin Fan on Nissan X-Trail
Nissan X Trail (2001-2006 / MK 1, T30) .. the cabin fan from a first-generation Nissan X-Trail by following the instructions below. First, get inside the car and remove the glove compartment;.. …
How to Replace the Cabin Fan Resistor on the Nissan X-Trail?
How to Replace the Cabin Fan Resistor on the Nissan X-Trail?
Nissan X Trail (2014-2023 / MK 3, T32) .. replace the cabin fan resistor on the Nissan X-Trail by opening the glove compartment on the passenger side: this can then be freed from the corresponding.. …
Replacing the Cabin Fan Resistor on Nissan X Trail
Nissan X Trail (2001-2006 / MK 1, T30) .. To access the cabin fan resistor on Nissan X Trail T30 and replace it, simply remove the panel beneath the glove compartment by pulling it off by.. …

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos