Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Cabin Fan on Nissan X-Trail

Model: Nissan X Trail MK 1, T30 - Years 2001-2006
Part: Blower motor

In this video tutorial, learn how to remove the cabin fan from a first-generation Nissan X-Trail by following the instructions below. First, get inside the car and remove the glove compartment; to do this, unscrew the screws found inside, as shown in the video. Once removed, take out the relays and remove the fan resistor; then, take out the entire white box where the fan is located. Finally, unscrew the screws to access and replace the cabin fan, following the video until the end!

Updated on 5 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Disassembly of the cabin fan of the Nissan X-Trail
Disassembly of the cabin fan of the Nissan X-Trail
Nissan X Trail (2007-2014 / MK 2, T31) .. and replacing the cabin fan of the Nissan X-Trail. First, we climb aboard the cabin and begin to disassemble and remove the glove compartment; then.. …
Replacing the Cabin Fan Resistor on Nissan X Trail
Nissan X Trail (2001-2006 / MK 1, T30) .. To access the cabin fan resistor on Nissan X Trail T30 and replace it, simply remove the panel beneath the glove compartment by pulling it off by.. …
How to Replace the Cabin Fan Resistor on the Nissan X-Trail?
How to Replace the Cabin Fan Resistor on the Nissan X-Trail?
Nissan X Trail (2014-2023 / T32, MK 3) .. replace the cabin fan resistor on the Nissan X-Trail by opening the glove compartment on the passenger side: this can then be freed from the corresponding.. …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos