Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Fan Resistor on Nissan X Trail

Model: Nissan X Trail MK 1, T30 - Years 2001-2006
Part: Blower motor

To access the cabin fan resistor on Nissan X Trail T30 and replace it, simply remove the panel beneath the glove compartment by pulling it off by hand. To remove the resistor, unscrew the two screws on the sides: it seems easy, but the limited space makes these screws difficult to access, so be patient. Once unscrewed, press the tab and pull out the resistor. In the same way, reverse the process to install the new resistor and finally reattach the panel beneath the glove compartment. Good luck!

Updated on 16 April 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace the Cabin Fan Resistor on the Nissan X-Trail?
How to Replace the Cabin Fan Resistor on the Nissan X-Trail?
Nissan X Trail (2014-2023 / T32, MK 3) You can replace the cabin fan resistor on the Nissan X-Trail by opening the glove compartment on the passenger side: this can then be freed from the …
Removing the Cabin Fan on Nissan X-Trail
Removing the Cabin Fan on Nissan X-Trail
Nissan X Trail (2001-2006 / MK 1, T30) In this video tutorial, learn how to remove the cabin fan from a first-generation Nissan X-Trail by following the instructions below. First, get insi…
Disassembly of the cabin fan of the Nissan X-Trail
Disassembly of the cabin fan of the Nissan X-Trail
Nissan X Trail (2007-2014 / MK 2, T31) The instructions provided in this guide will show us the procedure for disassembling and replacing the cabin fan of the Nissan X-Trail. First, we cli…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos