Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Note
    4. : Light bulb

Nissan Note - Light bulb

Light Bulb Nissan Note (2004-2013 / e 11, mk 1)

Nissan Note (2004-2013 / E11, MK 1)
How to Replace the Front and Rear Headlight Bulbs of the Nissan Note
In this guide, you will find instructions for removing and replacing the front and rear headlight bulbs of the Nissan Note. First, open the engine bonnet and …Read all…
Posted on 25 May 2026 by ScegliAuto
Nissan Note (2004-2013 / E11, MK 1)
How to Replace a Brake Light Bulb on a Nissan Note
To replace a brake light bulb on a Nissan Note, follow these simple instructions. First, open the boot and remove the two screws from the light unit where the …Read all…
Posted on 25 July 2026 by ScegliAuto
Car stereo (11) Battery (2) Spark plugs (2) Key (3) Trunk lock (1) Timing belt (1) V-belt (2) Onboard computer (1) Checks and maintenance (7) Bearing (1) Rear bench seat (1) Tail light (5) Fog lights (1) Air filter (3) Cabin air filter (4) Diesel fuel filter (4) Parking brake (1) Light bulb (2) Headlight bulb (8) Tail light bulb (4) License plate light (1) Handle (1) Engine oil (3) Clock (3) Door trim panel (1) Rear bumper (2) Shift knob (1) Instrument cluster (4) Fuse box (21) Seat (1) Door lock (1) Warning light – error code (14) Tire pressure warning light (11) Service warning light (55) Windshield wipers (1) Blower motor (1)

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos