Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Door Pillar Trim on a Nissan Qashqai J11

Model: Nissan Qashqai J11 - Years 2014-2022
Part: Body

Learn how to remove the front door pillar trim on a Nissan Qashqai J11: lower the window of the door and push the seat back as far as possible. Locate the clips; look for small holes. With a torch, you should see the tip of the clip (there are 2/3 for each pillar). Ideally, use a long, thin pick, but a very small screwdriver will also work. Insert the pick into the hole and hook the tip of the clip, which you will rotate 90° counterclockwise to unlock it. Do not pull on the pillar before rotating all the clips, as you may break them. Even when you are sure you have removed them all, do not pull forcefully.

Posted on 13 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the OBD port of the Nissan Qashqai J11?
Nissan Qashqai (2014-2022 / J11) Below, discover where the OBD port of your Nissan Qashqai J11 (2014-2022) is located. This port allows you to connect any compatible diagnostic tool …
How to replace the gear knob of the Nissan Qashqai J11
How to replace the gear knob of the Nissan Qashqai J11
Nissan Qashqai (2014-2022 / J11) The steps to follow to complete the replacement of the gear knob of your Nissan Qashqai J11 are really very simple and you just need to read the foll…
Removing the Centre Console on Nissan Qashqai J11
Removing the Centre Console on Nissan Qashqai J11
Nissan Qashqai (2014-2022 / J11) In today's tutorial video, you will learn how to remove the centre console from a Nissan Qashqai J11, second series, by following the instructions be…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos