Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil and Filter Replacement

Model: Mercedes Classe M W163 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Oil filter

See other generations:
Video tutorial

This video shows how to replace the engine oil and filter. First, raise the car on a ramp and remove the undertray to access the oil sump bolt more easily.

Once you locate the oil change bolt, place a container underneath and unscrew it to let the used oil drain into the container. Next, unscrew the oil filter housing and remove it, replacing all relevant seals and, of course, the oil filter.

Finally, reassemble everything and pour the required amount of new oil through the oil filler cap in the engine bay.


Updated on 10 February 2026 by ScegliAuto


Related tutorials

How to Replace Engine Oil and the Oil Filter
How to Replace Engine Oil and the Oil Filter
Mercedes Classe M (1997-2005 / W163) In this video, the engine oil and filter are replaced on a Mercedes M-Class. Ensure the vehicle's engine is cold. Open the bonnet and remove the plas…
Restoring Power Steering Oil Level
Restoring Power Steering Oil Level
Mercedes Classe M (1997-2005 / W163) Whenever you perform maintenance on the power steering that may involve the pump or the steering box, restore the oil level in the circuit to avoid a…
Engine Oil and Filter Replacement
Engine Oil and Filter Replacement
Mercedes Classe M (2005-2011 / W164) Once you have raised the vehicle on the ramp, remove the cover to access the oil sump: the drain plug is located at the front, just above the stabili…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos