Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe M
    4. : Replacement button to raise car window

Mercedes Classe M - Video tutorial

Model: Mercedes Classe M W163 - Years 1997-2005
Part: Push button
Operation: Replacement button to raise car window

The guide shows how you can change the button to raise the window of your car. It is a very simple operation that does not require the help of the mechanic. You have to take a small to medium-sized slotted screwdriver, and then slightly pry the corners of the old keypad. In order not to damage the plastic of the car interior, it is a good idea to put a cloth where you pry, or wrap the tip of the screwdriver with the same. You need to pay close attention to the force used, since the plastic surrounding the buttons is a bit delicate. At some point, the button will tend to come off on its own. Once removed from its housing, you need to disconnect the wire connector simply by pulling it towards yourself.


Posted on 14 September 2023 by ScegliAuto



How to replace the window control panel
Mercedes Classe M (1997-2005 / W163) The guide shows how to replace the window control panel of our car in case of breakdown or breakage, independently, without spending money on a mecha
Remove the window control panel of a Mercedes Merdedes M Series
Mercedes Classe M (2005-2011 / W164) How to remove the window control panel placed in the panel of a Mercedes Merdedes M Series? Before starting the disassembly work, let's disconnect th
Replacement of window lifter control push-button panel
Mercedes Classe M (1997-2005 / W163) The push-button panel for the glass lifting and external mirror adjustment controls is located on the lining of the central tunnel, immediately behin

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos