Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe M
    4. : Replacement of window lifter control push-button panel

Mercedes Classe M - Video tutorial

Model: Mercedes Classe M W163 - Years 1997-2005
Part: Push button
Operation: Replacement of window lifter control push-button panel

The push-button panel for the glass lifting and external mirror adjustment controls is located on the lining of the central tunnel, immediately behind the gear lever: to be able to replace it, it is necessary to unhook the entire frame that covers the tunnel itself; therefore open the storage compartment under the armrest and unscrew the screws on the bottom to extract the compartment cover, unhook the frame under the gear lever and then the entire tunnel lining; at this point it is possible to disconnect the pushbutton panel sockets and unscrew the relative fixing screws to then proceed with the replacement.


Posted on 29 August 2023 by ScegliAuto



Remove the window control panel of a Mercedes Merdedes M Series
Mercedes Classe M (2005-2011 / W164) .. unscrewed all the fastening screws of the push button panel, pry it up and extract it out of the door panel. We disconnect the power supply cables with..
Car door panel replacement
Mercedes Classe M (1997-2005 / W163) With a little dedication and passion we will be able to do this on our own. Once the door panel has been removed we will be able to intervene in the
How to replace the window control panel
Mercedes Classe M (1997-2005 / W163) The guide shows how to replace the window control panel of our car in case of breakdown or breakage, independently, without spending money on a mecha

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos