Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe M
    4. : Removing the fuel pump of a Mercedes M-Class

Mercedes Classe M - Video tutorial

Model: Mercedes Classe M W163 - Years 1997-2005
Part: Fuel pump
Operation: Removing the fuel pump of a Mercedes M-Class

Let's see the disassembly of the fuel pump of a Mercedes M-Class. To begin with, we disconnect the battery cables, then, we remove the rear seats of the car. We will find a metal cap with screws, which we need to disassemble. Unscrew the tightening screws of the metal cap with a socket wrench, remove it from its seat. We wrap the entire perimeter of the sheet with rags, then, with a chisel, unscrew the large locking pin. Finally we disconnect the power supply terminals and the liquid circulation tubes. We take out the floating fuel pump from the tank.


Posted on 25 November 2023 by ScegliAuto



How to remove the fuel pump of a Mercedes M-Class
Mercedes Classe M (1997-2005 / W163) .. go and disconnect the battery of our Mercedes M-Class, so that we can work in total safety. Let's start by lifting the lower section of the front passenger..
How to disassemble the fuel pump in the Mercedes M-Class?
Mercedes Classe M (2011-2018 / W166) .. to disassemble the fuel pump in the Mercedes M-Class, a simple operation but one that requires good manual dexterity. First of all, we lift the vehicle..
Guide to replacing the fuel pump of the Mercedes ML
Mercedes Classe M (2011-2018 / W166) The replacement of the fuel pump on the Mercedes ML involves removing the tank; it is therefore necessary to lift the vehicle and proceed with the re

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos