Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Complete Removal of the Centre Tunnel

Model: Mercedes Classe M W164 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Center console tunnel

See other generations:
Video tutorial

Open the drawer and remove the ashtray. Using a plastic tool to avoid damaging the bodywork, lever at the base of the climate control panel and remove the panel, taking care with the electrical connections that must be removed carefully.

Unscrew the screws from the ashtray compartment and gently pull out the complete console, lifting it to allow disconnection of the connectors located at the back. Still using a plastic tool, lever at the base of the tunnel above the gearbox to release the plastic clips of the cover and remove it by disconnecting the connectors.

Remove the screws at the bottom of the tunnel and the glove compartment, then disconnect all connectors. Now it is possible to remove the entire tunnel.


Updated on 3 February 2026 by ScegliAuto


Related tutorials

Removing the Tunnel on a Mercedes M-Class
Removing the Tunnel on a Mercedes M-Class
Mercedes Classe M (1997-2005 / W163) Are the plastics of the central tunnel due for replacement? Here’s how to remove the tunnel on a Mercedes M-Class. Pry off the covering located at th…
How to Remove the Centre Console of the Mercedes M-Class
How to Remove the Centre Console of the Mercedes M-Class
Mercedes Classe M (1997-2005 / W163) Below are the steps to remove and replace the centre console of the Mercedes M-Class. First, get inside the cabin and start by removing the armrest a…
Instructions for Removing the Armrest
Instructions for Removing the Armrest
Mercedes Classe M (1997-2005 / W163) To remove the centre tunnel, start by detaching the trim at the base of the gear lever, unscrew the two screws at the bottom of the glove compartment…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos