Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe M
    4. : Disassembly of the electric fan unit

Mercedes Classe M - Video tutorial

Model: Mercedes Classe M W163 - Years 1997-2005
Part: Radiator
Operation: Disassembly of the electric fan unit

To be able to disassemble the electric fan unit located right in front of the radiator, first open the front hood and unscrew the fixing pins of the fan support frame (use a joint wrench with an extension); then disconnect the power sockets to release the fans and continue with the disassembly of the headlights by removing the frames underneath; finally, complete the disassembly of the bonnet knocker crossbar to have sufficient maneuvering space to extract the electro fan assembly with its support frame.


Posted on 1 September 2023 by ScegliAuto



Removing the radiator fan clutch
Mercedes Classe M (1997-2005 / W163) The radiator cooling fan is equipped with a clutch connected to the fan itself and it is possible to purchase it separately also in the after market;
Cooling fan repair
Mercedes Classe M (1997-2005 / W163) The cooling fan is part of the car's engine cooling system and should therefore always be serviced. The function of the fan is to ensure that the car
Replacing the viscous coupling of the radiator fan
Mercedes Classe M (1997-2005 / W163) The working principle of the viscous coupling is to drag the fan when the engine is very hot, to cool it with air conveyed at high speed. The fan als

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos