Do it yourself
Frequently asked questions about cars and motorcycles

Removal and Replacement of the Bumper

Model: Mercedes Classe M W163 - Years 1997-2005
Part: Rear bumper

In this video tutorial, you will learn how to remove and replace a bumper. Start by opening the bonnet and once you see where the screws are located, proceed with the operation. Now, remove all the clips on the bumper. Once done, you will notice that there are screws inside these spaces that keep the bumper securely attached to the chassis. After removing all the screws, you can proceed with the removal. Once replaced, to reattach the new bumper, you need to measure everything to ensure the bumper is well centred.

Updated on 23 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Mercedes Classe M (2005-2011 / W164) Is the rear bumper of your Mercedes ML damaged? Here’s how to remove it from the back of the vehicle. Open the boot, remove the fabric cover in the l…
Mercedes Classe M (2005-2011 / W164) Before starting, open the tailgate of the boot on your Mercedes M-Class. Begin by unscrewing and removing the screws that secure the rear bumper to t…
Mercedes Classe M (2005-2011 / W164) Before you can start, open the tailgate of your Mercedes M-Class. Begin by unscrewing and removing all the bolts and screws securing the bumper, loca…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos