Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the rear bumper of the Mercedes M-Class?

Model: Mercedes Classe M W164 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Rear bumper

See other generations:
Video tutorial

In order to replace the rear bumper of the Mercedes M-Class, you need to loosen the screws that hold it to its housing: these screws will be located inside the rear wheel arches and at the bottom of the bumper itself. Once these screws have been loosened, you can detach the inner side panels of the trunk, so that the screws holding it from the top can be loosened.

At this point, you can insert the new replacement piece into its seat, securing it with the appropriate screws that have just been loosened.


Posted on 5 December 2024 by ScegliAuto


Related tutorials

How to Remove the Rear Bumper of a Mercedes M-Class
How to Remove the Rear Bumper of a Mercedes M-Class
Mercedes Classe M (2005-2011 / W164) .. open the tailgate of the boot on your Mercedes M-Class. Begin by unscrewing and removing the screws that secure the rear bumper to the chassis, located.. …
How to Remove the Rear Bumper from the Mercedes M-Class
How to Remove the Rear Bumper from the Mercedes M-Class
Mercedes Classe M (1997-2005 / W163) .. To remove the rear bumper from the Mercedes M-Class, use a tool to pry off the three panels located at mid-height on the bumper: these panels are at.. …
How to Remove the Rear Bumper of a Mercedes M-Class
How to Remove the Rear Bumper of a Mercedes M-Class
Mercedes Classe M (2005-2011 / W164) .. can start, open the tailgate of your Mercedes M-Class. Begin by unscrewing and removing all the bolts and screws securing the bumper, located around.. …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos