Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe M
    4. : Disassembly of the front bumper of the Mercedes ML

Mercedes Classe M - Video tutorial

Model: Mercedes Classe M W164 - Years 2005-2011
Part: Front bumper
Operation: Disassembly of the front bumper of the Mercedes ML

Today we discover the guide on how to disassemble and replace the front bumper of the Mercedes ML, in simple steps. First, lift the vehicle and start unscrewing the screws located on the lower part of the front bumper; then remove all the plastic clips found on both sides of the front wheel arches, as shown in the video. At this point, open the hood and unscrew the additional screws located on the upper part of the bumper; then gently release the bumper on the sides until it is completely removed, finally reinstalling the new front bumper!


Posted on 11 March 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos