Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Headlights of the Mercedes Vito

Model: Mercedes Vito MK 3, W447 - Years 2014-2024
Part: Headlight

Follow these instructions to remove and replace the front headlights of the Mercedes Vito. First, open the bonnet of the vehicle and begin by removing the grille and front bumper. Unscrew the fixing screws and remove the clips; finally, unscrew the screws located on both sides of the front wheel arches, as shown in the video. At this point, unscrew the screws of the headlight assembly and disconnect the electrical connector of the lights to remove and replace the front headlight with the new one!

Updated on 19 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the front headlights of the Mercedes Vito
How to disassemble the front headlights of the Mercedes Vito
Mercedes Vito (2003-2013 / W639, MK 2) Today's steps will show us how to disassemble and replace the front headlights and its bulbs of the Mercedes Vito, following the instructions below. …
Where are the fuses located in the Mercedes Vito?
Where are the fuses located in the Mercedes Vito?
Mercedes Vito (2014-2024 / MK 3, W447) Any fuse of the Mercedes Vito is contained within one of the appropriate fuse boxes that are present on the vehicle: in this type of car it is possib…
Where are the fuses located in the Mercedes Vito?
Where are the fuses located in the Mercedes Vito?
Mercedes Vito (1995-2003 / W638, MK 1) Each of the fuse boxes on the Mercedes Vito is responsible for containing the fuses that regulate the operation of the devices: the first one is loca…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos