Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Vito
    4. : Headlight

Mercedes Vito - Headlight

Mercedes Vito (2003-2013 / W639, MK 2)
How to replace the high beam on a Mercedes Vito
Make sure the vehicle is turned off and open the hood to access the engine compartment. Locate the headlight and remove the plastic cover behind the headlight …read all…
Posted on 7 May 2024 by ScegliAuto
Mercedes Vito (2003-2013 / W639, MK 2)
How to replace the front headlight of the Volkswagen Vito W639
In this video we can see how the youtuber replaces the completely fogged headlight of the Mercedes Vito W639: to do this we need to remove the front grille …read all…
Posted on 3 March 2024 by ScegliAuto
Mercedes Vito (1995-2003 / W638, MK 1)
How to replace the front headlights on the Mercedes Vito W638.
In this video, we see how to replace the front headlight of the Mercedes Vito W638: we start by unscrewing the fastening element of the radiator grille, which …read all…
Posted on 1 October 2023 by ScegliAuto
Mercedes Vito (2014-2024 / MK 3, W447)
Replacement of the front headlights of the Mercedes Vito
Today we will see the instructions that will allow us to disassemble and replace the front headlights of the Mercedes Vito, following the instructions below. …read all…
Posted on 27 September 2023 by ScegliAuto
Mercedes Vito (2014-2024 / MK 3, W447)
How do you remove the headlight from the Mercedes Vito?
In order to remove the headlight from the Mercedes Vito, you need to go and open the bonnet, so that you can loosen the screws that fix the panel positioned in …read all…
Posted on 3 June 2023 by ScegliAuto
Mercedes Vito (1995-2003 / W638, MK 1)
How to replace the headlight on the Mercedes Vito
To replace the headlight of the Mercedes Vito, we start by opening the bonnet by holding it up, with a torx t30 key, unscrew the upper screws of the mask, …read all…
Posted on 8 December 2022 by ScegliAuto
Shock absorbers (1) Car stereo (5) Battery (8) Arm (1) Glow plugs (1) Glove box (1) Key (2) Timing belt (1) -board computer (6) Checks and maintenance (35) Dashboard (3) Headlight (6) Tail light (1) Cabin air filter (4) Diesel filter (2) Grille (1) Light bulb (1) Headlight bulb (1) Rear light bulb (1) Antifreeze liquid (1) Handle (3) Window motor (1) Door panel (4) Tires (1) Door (2) Push button (1) Instrument cluster (8) Wheel (4) Fuse box (31) Seat (4) Outside rearview mirror (1) Windscreen wipers (1) Thermostat (1) Valve (1) Interior blower (1) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos