Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Vito
    4. : Diesel filter

Mercedes Vito - Diesel filter

Mercedes Vito (1995-2003 / W638, MK 1)
Diesel filter replacement on Mercedes Vito
Raise the hood of your Mercedes Vito. Locate the diesel filter as shown in the video. Unscrew, with a flathead screwdriver, the screw that holds the clamp of …read all…
Posted on 31 March 2024 by ScegliAuto
Mercedes Vito (2003-2013 / MK 2, W639)
How to replace the diesel filter on the Mercedes Vito
Replacing the diesel filter is a very important maintenance to ensure good efficiency of the fuel supply system, to the benefit of starting, reducing smoke, …read all…
Posted on 10 November 2023 by ScegliAuto
Shock absorbers (1) Car stereo (5) Battery (8) Arm (1) Glow plugs (1) Glove box (1) Key (2) Timing belt (1) -board computer (6) Checks and maintenance (35) Dashboard (3) Headlight (6) Tail light (1) Cabin air filter (4) Diesel filter (2) Grille (1) Light bulb (1) Headlight bulb (1) Rear light bulb (1) Antifreeze liquid (1) Handle (3) Window motor (1) Door panel (4) Tires (1) Door (2) Push button (1) Instrument cluster (8) Wheel (4) Fuse box (31) Seat (4) Outside rearview mirror (1) Windscreen wipers (1) Thermostat (1) Valve (1) Interior blower (1) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos