Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Vito
    4. : Door panel

Mercedes Vito - Door panel

Mercedes Vito (2003-2013 / MK 2, W639)
Disassembly of the Mercedes Vito door panel.
In this guide, we will briefly go over the steps on how to disassemble and replace the front door panel of a Mercedes Vito, following the instructions below. …read all…
Posted on 29 April 2023 by ScegliAuto
Mercedes Vito (2014-2024 / W447, MK 3)
How to remove the door panel of a Mercedes Vito
Before we can start, we will have to go and open the door of our Mercedes Vito. So let's start by disengaging the plastic placed near the mirror. Once this is …read all…
Posted on 11 January 2024 by ScegliAuto
Mercedes Vito (2014-2024 / W447, MK 3)
Removing the front left door panel Mercedes Vito
Needed: flat screwdriver, Phillips screwdriver, plastic tool for car interiors. Manually remove the plastic triangulation on the door jamb and the handle cover …read all…
Posted on 15 December 2023 by ScegliAuto
Mercedes Vito (2003-2013 / MK 2, W639)
Removing the door panel of a Mercedes Vito
Let's remove the door panel of a Mercedes Vito (driver's side), let's see how to proceed. Before starting the disassembly work, let's disconnect the battery …read all…
Posted on 11 October 2023 by ScegliAuto
Shock absorbers (1) Car stereo (5) Battery (8) Arm (1) Glow plugs (1) Glove box (1) Key (2) Timing belt (1) -board computer (6) Checks and maintenance (35) Dashboard (3) Headlight (6) Tail light (1) Cabin air filter (4) Diesel filter (2) Grille (1) Light bulb (1) Headlight bulb (1) Rear light bulb (1) Antifreeze liquid (1) Handle (3) Window motor (1) Door panel (4) Tires (1) Door (2) Push button (1) Instrument cluster (8) Wheel (4) Fuse box (31) Seat (4) Outside rearview mirror (1) Windscreen wipers (1) Thermostat (1) Valve (1) Interior blower (1) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos