Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the front door panel of the Mercedes Vito

Model: Mercedes Vito MK 3, W447 - Years 2014-2024
Part: Door trim panel

Today we will see the instructions that will allow us to disassemble and replace the front door panel of the Mercedes Vito. First, we open the front door and start removing the plastic partition of the door panel; then we unscrew all the fixing screws that we find below and on the sides, as shown in the video. At this point, we detach the door panel on the sides, disconnecting the electrical connector and the opening handle cable; then if necessary, we replace the panel with the new one, applying the reverse procedure for reassembly!

Posted on 29 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the front door panel of the Mercedes Vito
How to disassemble the front door panel of the Mercedes Vito
Mercedes Vito (2014-2024 / MK 3, W447) These short and simple steps will show us how to disassemble and replace the front door panel of the Mercedes Vito. First, we open the front door of …
Disassembly of the front door panel of the Mercedes Vito.
Disassembly of the front door panel of the Mercedes Vito.
Mercedes Vito (2014-2024 / MK 3, W447) .. Today we will learn how to disassemble the front door panel of the Mercedes Vito, in simple steps. First, open the front.. …
Removing the Door Panel of the Mercedes Vito
Removing the Door Panel of the Mercedes Vito
Mercedes Vito (2003-2013 / W639, MK 2) This guide briefly outlines the steps to remove and replace the front door panel of the Mercedes Vito, following the instructions below. First, open …

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos