Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Warning Light on the Mercedes Vito

Model: Mercedes Vito MK 3, W447 - Years 2014-2024
Part:

From the instrument panel of the Mercedes Vito, you can clear the Service light by inflating the tyres until they reach the optimal pressure value, which is indicated on the sticker affixed to the driver's door pillar. Once the tyres are inflated, go inside the cabin and navigate through the menu that appears on the instrument panel: select the 'Tyre pressure' option and then press OK. The warning light will disappear after driving a few metres with the tyres properly inflated.

Posted on 15 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the tire pressure warning light of the Mercedes Vito?
How do you reset the tire pressure warning light of the Mercedes Vito?
Mercedes Vito (2014-2024 / MK 3, W447) In order to reset the tire pressure warning light on the Mercedes Vito, you need to inflate the tires until they reach the correct pressure value: th…
How to reset the tire pressure warning light on the Mercedes Vito
How to reset the tire pressure warning light on the Mercedes Vito
Mercedes Vito (2003-2013 / W639, MK 2) Today we will see the necessary instructions on how to reset the tire pressure warning light (TPMS) of the Mercedes Vito; before performing the reset…
Reset of the tire pressure warning for the Mercedes Vito.
Reset of the tire pressure warning for the Mercedes Vito.
Mercedes Vito (2014-2024 / MK 3, W447) Below we will see the instructions on how to reset the tire pressure warning light on the Mercedes Vito. Before performing the reset of the TPMS sens…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos