Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to install the external door handle of the Mercedes Vito

Model: Mercedes Vito MK 3, W447 - Years 2014-2024
Part: Handle

The following steps will show us how to install the front door handle of the Mercedes Vito. First, we open the front door and start removing the connector found inside the door on the outer hole of the handle; then we proceed to install the rubber plate, as shown in the video. At this point, we install the handle and fit it perfectly on the guide; we then fix the lock cylinder, making the electrical connection, ensuring that the handle opens and closes correctly. Finally, we secure the side screw of the door!

Posted on 1 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the external handle of the sliding door on the Mercedes Vito
How to replace the external handle of the sliding door on the Mercedes Vito
Mercedes Vito (2014-2024 / MK 3, W447) To replace the external handle of the sliding door on the Mercedes Vito, open the door and detach the circular cover located on its side. Once this c…
How to replace the external door handle of the Mercedes Vito
How to replace the external door handle of the Mercedes Vito
Mercedes Vito (2014-2024 / MK 3, W447) Today's information will allow us to disassemble and replace the external door handle of the Mercedes Vito. First, we open the front door of the vehi…
How to Remove the Driver's Door Handle of the Mercedes Benz Vito V250 w447
How to Remove the Driver's Door Handle of the Mercedes Benz Vito V250 w447
Mercedes Vito (2014-2024 / MK 3, W447) This guide shows how to remove the external handle of the driver's door of the Mercedes Benz Vito V250 w447. The first step is to remove the cap from…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos