Do it yourself
| ||||
|
Mercedes Vito - Video tutorial
Model: Mercedes Vito
MK 3, W447
- Years 2014-2024 The guide shows how to remove the external door handle of the driver's door of the Mercedes Benz Vito V250 w447. The first operation to be carried out is to remove the cap of the screw hole of the handle, located in the door gap. Using a Torx T20 screwdriver, unscrew the screw slightly in the hole in order to only remove the end part of the handle lever. At this point, it is possible to remove the handle by pulling it towards the outside of the vehicle. Extract the end that acts as the fulcrum of the handle following the groove produced on the handle.
Posted on 17 February 2024 by ScegliAuto
Other guides that may interest you
|
How to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.014
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |