Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the external door handle of the Mercedes Vito

Model: Mercedes Vito MK 3, W447 - Years 2014-2024
Part: Handle

Today's information will allow us to disassemble and replace the external door handle of the Mercedes Vito. First, we open the front door of the vehicle and start unscrewing the screw located on the side, inside the hole; this way we will be able to extract the lock cylinder first, disconnecting the electrical connector located on the back, as shown in the video. At this point, we remove the door opening handle, replacing it with the new one; we reassemble the lock cylinder and finally fix the side screw.

Posted on 30 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to install the external door handle of the Mercedes Vito
How to install the external door handle of the Mercedes Vito
Mercedes Vito (2014-2024 / MK 3, W447) The following steps will show us how to install the front door handle of the Mercedes Vito. First, we open the front door and start removing the conn…
How to Remove the Driver's Door Handle of the Mercedes Benz Vito V250 w447
How to Remove the Driver's Door Handle of the Mercedes Benz Vito V250 w447
Mercedes Vito (2014-2024 / MK 3, W447) This guide shows how to remove the external handle of the driver's door of the Mercedes Benz Vito V250 w447. The first step is to remove the cap from…
How to Remove the Door Handle of the Mercedes Vito
How to Remove the Door Handle of the Mercedes Vito
Mercedes Vito (1995-2003 / W638, MK 1) Removing the door handle of the Mercedes Vito W368 is a straightforward task that you can do independently by following one of our video tutorials. S…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos