Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the External Handle on a Mercedes Vito

Model: Mercedes Vito MK 3, W447 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Handle

See other generations:
Video tutorial

Removing the external handle from a door of the Mercedes Vito is a quick and simple task. After opening the relevant door, remove the round black cover screw using a plastic lever or flat screwdriver.

Unscrew the accessible T20 Torx screw while holding the handle with your other hand. At this point, the lock mechanism will come out of the door, and you can disconnect its connector.

Pull the handle, which will easily come out of its housing, and then reverse the process for reassembly. This is a job that anyone can do.


Updated on 8 April 2026 by ScegliAuto


Related tutorials

Where is the OBD port located in the Mercedes Vito?
Where is the OBD port located in the Mercedes Vito?
Mercedes Vito (2003-2013 / MK 2, W639) The OBD port of the Mercedes Vito vehicle is located inside the cabin, specifically under the dashboard near the pedals. Unlike other vehicles, the p…
Where is the fuse box of the Mercedes Vito W638 located?
Where is the fuse box of the Mercedes Vito W638 located?
Mercedes Vito (1995-2003 / MK 1, W638) If you own a Mercedes Vito W638 and need access to the fuses but don't know where the box containing them is located, all you have to do is follow th…
How to Remove the Battery from a Mercedes Vito
How to Remove the Battery from a Mercedes Vito
Mercedes Vito (2003-2013 / MK 2, W639) Before starting, open the driver’s door of your Mercedes Vito. Begin by prising off and removing the side cover of the battery. Next, unscrew and loo…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos