Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Vito
    4. : Handle

Mercedes Vito - Handle

Handle Mercedes Vito (2014-2024 / mk 3, w 447)

Mercedes Vito (2014-2024 / MK 3, W447)
How to replace the external door handle of the Mercedes Vito
Today's information will allow us to disassemble and replace the external door handle of the Mercedes Vito. First, we open the front door of the vehicle and …Read all…
Posted on 30 July 2025 by ScegliAuto
Mercedes Vito (2014-2024 / MK 3, W447)
How to Install the External Door Handle on the Mercedes Vito
The following steps will show you how to install the front door handle on the Mercedes Vito. First, open the front door and start by removing the connector …Read all…
Posted on 27 October 2026 by ScegliAuto
Mercedes Vito (2014-2024 / MK 3, W447)
How to Remove the Driver's Door Handle of the Mercedes Benz Vito V250 w447
This guide shows how to remove the external handle of the driver's door of the Mercedes Benz Vito V250 w447. The first step is to remove the cap from the screw …Read all…
Posted on 14 September 2026 by ScegliAuto
Mercedes Vito (2014-2024 / MK 3, W447)
How to replace the external handle of the sliding door on the Mercedes Vito
To replace the external handle of the sliding door on the Mercedes Vito, open the door and detach the circular cover located on its side. Once this cover is …Read all…
Posted on 26 September 2026 by ScegliAuto
Mercedes Vito (2014-2024 / MK 3, W447)
Replacing the External Handle on a Mercedes Vito
Removing the external handle from a door of the Mercedes Vito is a quick and simple task. After opening the relevant door, remove the round black cover screw …Read all…
Posted on 12 May 2026 by ScegliAuto
Airbag (1) Shocks (1) Car stereo (11) Anti-roll bar (1) Battery (15) Control arm (1) Glow plugs (1) Glove compartment (1) Key (7) Trunk lock (1) Timing belt (1) V-belt (1) Checks and maintenance (15) Dashboard (4) MAF sensor (1) Rear bench seat (2) Headlight (9) Tail light (2) Air filter (3) Cabin air filter (7) Diesel fuel filter (3) Grille (1) Light bulb (2) Headlight bulb (7) Tail light bulb (5) Antifreeze coolant (1) Handle (5) Power window motor (2) Brake fluid (1) Engine oil (7) Clock (25) Door trim panel (10) Tires (1) Shift knob (4) Pump (1) Car door (6) Push button (1) Power window switch (1) Instrument cluster (2) Wheel (8) Fuse box (79) Seat (7) Suspension system (1) Side mirror (3) AdBlue warning light (9) Warning light – error code (11) Tire pressure warning light (7) Service warning light (103) Windshield wipers (3) Thermostat (1) Drivetrain (1) Turbocharger (1) Valve (1) EGR valve (1) Blower motor (3) Steering wheel (2)

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos