Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Vito
    4. : Dashboard

Mercedes Vito - Dashboard

Mercedes Vito (2003-2013 / W639, MK 2)
Where is the OBD port located in the Mercedes Vito 2011?
To be able to find the OBD port located inside your Mercedes Sprinter W639 (2011) on your own, you just need to carefully follow the instructions in this new …read all…
Posted on 1 May 2024 by ScegliAuto
Mercedes Vito (2014-2024 / MK 3, W447)
How do you remove the dashboard of the Mercedes Vito?
In order to dismantle the dashboard of the Mercedes Vito, you need to use an object to lever off the front door pillars so that you can detach them. By …read all…
Posted on 6 April 2024 by ScegliAuto
Mercedes Vito (2014-2024 / MK 3, W447)
Where is the OBD2 port located on the Mercedes Vito W447?
If you are curious to find out where the OBD2 port of your Mercedes Vito W447 is located, then all you have to do is carefully read the following guide and …read all…
Posted on 21 December 2023 by ScegliAuto
Shock absorbers (1) Car stereo (5) Battery (8) Arm (1) Glow plugs (1) Glove box (1) Key (2) Timing belt (1) -board computer (6) Checks and maintenance (35) Dashboard (3) Headlight (6) Tail light (1) Cabin air filter (4) Diesel filter (2) Grille (1) Light bulb (1) Headlight bulb (1) Rear light bulb (1) Antifreeze liquid (1) Handle (3) Window motor (1) Door panel (4) Tires (1) Door (2) Push button (1) Instrument cluster (8) Wheel (4) Fuse box (31) Seat (4) Outside rearview mirror (1) Windscreen wipers (1) Thermostat (1) Valve (1) Interior blower (1) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos