Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mercedes
  4. :
  5. Vito
  6. : Where is the OBD2 port located on the Mercedes Vito W447?

Mercedes Vito - Video tutorial

Model: Mercedes Vito MK 3, W447 - Years 2014-2024
Part: Dashboard
Operation: Where is the OBD2 port located on the Mercedes Vito W447?

If you are curious to find out where the OBD2 port of your Mercedes Vito W447 is located, then all you have to do is carefully read the following guide and follow all the described steps. First of all, it is necessary that your Mercedes Vito W447 is completely turned off for safety reasons. After that, enter the vehicle from the driver's side and shift your attention to the bottom of the steering wheel, specifically near the pedals. At this point, locate the OBD2 port on the right side, and you're done. In order to connect a diagnostic tool, you need to use a compatible cable.


Posted on 21 December 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos