Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the steering wheel of the Mercedes Vito

Model: Mercedes Vito W639, MK 2 - Years 2003-2013
Part: Steering wheel

In this guide, we will discover the instructions that will allow us to disassemble and replace the steering wheel of the Mercedes Vito. First, we get inside the vehicle and start unscrewing the rear screws of the steering wheel to remove the airbag (disconnecting the electrical connector); then we unscrew the central screw of the steering wheel, pulling it towards us to remove it, as shown in the video. At this point, we replace the steering wheel with the new one, inserting it correctly and making any necessary connections for the steering wheel controls; finally, we reassemble and connect the steering wheel airbag.

Posted on 27 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Steering Wheel on a Mercedes Vito?
How to Replace the Steering Wheel on a Mercedes Vito?
Mercedes Vito (2003-2013 / W639, MK 2) To replace the steering wheel on a Mercedes Vito, you need to loosen the bolts that secure the airbag in the centre of its housing: these bolts are l…
How to Remove the Battery from a Mercedes Vito
How to Remove the Battery from a Mercedes Vito
Mercedes Vito (2003-2013 / W639, MK 2) Before starting, open the driver’s door of your Mercedes Vito. Begin by prising off and removing the side cover of the battery. Next, unscrew and loo…
How to Replace the Wiper Blades on a Mercedes Vito?
How to Replace the Wiper Blades on a Mercedes Vito?
Mercedes Vito (2014-2024 / MK 3, W447) To replace the wiper blades on your Mercedes Vito, start by gently lifting the wiper arm to a vertical position. Now, if you look closely at the base…

Other guides you may be interested in

    Frequently Asked Questions

    • Vito 2014-2024 - How to remove the steering wheel of the Mercedes Vito, model 447 from 2014? Read answer

How to reset the tyre pressure warning light on a Hyundai Tucson

Below are the instructions to reset the tyre pressure warning light (TPMS) on a Hyundai Tucson. First, get into the vehicle and turn on the instrument cluster; then navigate to the vehicle settings until you reach the tyre pressure monitor, identifying the tyre with incorrect pressure. At this point, restore all tyre pressures according to the specifications indicated on the label; this will reset the TPMS and the warning light will be cleared from the instrument cluster!

Watch the video!


by ScegliAuto

More videos