Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the airbag of the Mercedes Vito W639

Model: Mercedes Vito MK 2, W639 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Airbag

See other generations:
Video tutorial

In this video we can see how to replace the airbag module of the Mercedes Vito: to remove it from its housing we need to insert two small screwdrivers into the release holes on the sides of the steering wheel, which allow the retaining springs to release the module.

It will then be easy to extract it, but be careful to remove the electrical connector.

It is very easy to find the piece to replace the airbag online, and used ones can be found at very good prices; since they are used parts we cannot give precise references, but it will be sufficient to type "airbag for Mercedes Vito W639" to find a wide selection.


Posted on 9 December 2024 by ScegliAuto


Related tutorials

How to replace the steering wheel of the Mercedes Vito
How to replace the steering wheel of the Mercedes Vito
Mercedes Vito (2003-2013 / MK 2, W639) In this guide, we will discover the instructions that will allow us to disassemble and replace the steering wheel of the Mercedes Vito. First, we get…
How to Remove the Turbo on a Mercedes Vito W639
How to Remove the Turbo on a Mercedes Vito W639
Mercedes Vito (2003-2013 / MK 2, W639) The video here demonstrates how to carry out the work mentioned on a Mercedes ML, but the procedure is identical for the Mercedes Vito W639. Lift the…
How to Replace the Steering Wheel on a Mercedes Vito?
How to Replace the Steering Wheel on a Mercedes Vito?
Mercedes Vito (2003-2013 / MK 2, W639) To replace the steering wheel on a Mercedes Vito, you need to loosen the bolts that secure the airbag in the centre of its housing: these bolts are l…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos