Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where to Find the OBD Port on the 2020 Mercedes Vito

Model: Mercedes Vito MK 3, W447 - Years 2014-2024
Part: Checks and maintenance

If you need to locate the OBD port on your latest series Mercedes Vito (2020), simply read this guide carefully and follow the described steps. First, reach the driver's seat inside the vehicle, ensuring that it is completely off, and then move to the pedal area. At this point, shift your attention to the side and locate the OBD port you are looking for. To analyse the ECU data, simply connect a diagnostic tool to the OBD port in question.

Posted on 23 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the OBD port located in the Mercedes Vito?
Where is the OBD port located in the Mercedes Vito?
Mercedes Vito (2003-2013 / W639, MK 2) The OBD port of the Mercedes Vito vehicle is located inside the cabin, specifically under the dashboard near the pedals. Unlike other vehicles, the p…
Locating the OBD Port on the Mercedes Vito 110 CDI
Locating the OBD Port on the Mercedes Vito 110 CDI
Mercedes Vito (2014-2024 / MK 3, W447) In this video, we will see the location of the OBD (On Board Diagnostics) port on the Mercedes Vito 110 CDI (both W638 and W639). The OBD port is loc…
Where is the OBD Port of the Mercedes Vito?
Mercedes Vito (2014-2024 / MK 3, W447) The diagnostic port or OBD port inside the Mercedes Vito is located under the dashboard on the driver's side. To access the port, you need to remove …

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos