Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the OBD port located in the Mercedes Vito 2011?

Model: Mercedes Vito W639, MK 2 - Years 2003-2013
Part: Dashboard

To be able to find the OBD port located inside your Mercedes Sprinter W639 (2011) on your own, you just need to carefully follow the instructions in this new guide. First of all, the vehicle must be completely turned off and parked on a flat surface for safety reasons. Immediately afterwards, go inside the cabin and reach the driver's seat, then move to the lower area of the dashboard and locate the OBD port on the left side of it. To access the OBD port, simply remove the protective cap.

Posted on 1 May 2024 by ScegliAuto

Video tutorial

Related tutorials

Where to Find the OBD Port on the 2020 Mercedes Vito
Where to Find the OBD Port on the 2020 Mercedes Vito
Mercedes Vito (2014-2024 / MK 3, W447) If you need to locate the OBD port on your latest series Mercedes Vito (2020), simply read this guide carefully and follow the described steps. First…
Where is the OBD port located in the Mercedes Vito W639?
Where is the OBD port located in the Mercedes Vito W639?
Mercedes Vito (2003-2013 / W639, MK 2) Below, we will discover where the OBD port is located inside your Mercedes Vito W639 (2003-2013). This is a very important port that allows you to ea…
Where is the OBD port located in the Mercedes Vito?
Where is the OBD port located in the Mercedes Vito?
Mercedes Vito (2003-2013 / W639, MK 2) The OBD port of the Mercedes Vito vehicle is located inside the cabin, specifically under the dashboard near the pedals. Unlike other vehicles, the p…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos