Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the spare wheel located in the Mercedes Vito W447

Model: Mercedes Vito MK 3, W447 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Wheel

See other generations:
Video tutorial

In this video, you can see where the spare wheel is located in the Mercedes Vito W447: open the rear tailgate and remove the plastic seal located under the rubber seal of the tailgate, which protects the two screws holding the floor panel. These two screws can be removed with a special spanner, to which an extension should be attached to allow you to unscrew both; this allows the spare wheel, located under the floor but accessible from the outside, to be lowered.

You will need to release the pin that allowed the wheel to drop, freeing it for use.


Updated on 17 September 2026 by ScegliAuto


Related tutorials

Guide to Replacing the Wheel with the Spare on the Mercedes Vito
Guide to Replacing the Wheel with the Spare on the Mercedes Vito
Mercedes Vito (2014-2024 / MK 3, W447) This guide provides instructions on how to replace the wheel with the spare on the Mercedes Vito. First, open the rear tailgate and begin unscrewing …
How to Remove the Spare Wheel from the Mercedes Vito
How to Remove the Spare Wheel from the Mercedes Vito
Mercedes Vito (2014-2024 / MK 3, W447) In this video, you can see how to access the spare wheel in the Mercedes Vito by following simple and effective steps. First, you should know that th…
Where is the OBD2 Port on the Mercedes Vito W447?
Where is the OBD2 Port on the Mercedes Vito W447?
Mercedes Vito (2014-2024 / MK 3, W447) If you are curious about the location of the OBD2 port on your Mercedes Vito W447, simply read the following guide carefully and follow all the descr…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos