Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Vito
    4. : How to remove the spare wheel of the Mercedes Vito

Mercedes Vito - Video tutorial

Model: Mercedes Vito MK 3, W447 - Years 2014-2024
Part: Wheel
Operation: How to remove the spare wheel of the Mercedes Vito

In this video we can see how it is possible to put the spare wheel in the Mercedes Vito, following simple and effective steps. First we need to know that the Mercedes Vito has a spare wheel that can be used in case a tire is punctured. The spare wheel is located at the rear of the vehicle under the rear luggage compartment. Take the keys supplied with the vehicle. Prepare the necessary material to be able to work. Insert the key into the hole provided just above the rear bumper after removing the rubber (As shown in the video). turn the key until the spare wheel, which is connected to a steel cable, is lowered. Once fully lowered, pull it out from under the vehicle and replace the punctured wheel.


Posted on 12 March 2024 by ScegliAuto

    Frequently Asked Questions

    • Vito 2014-2024 - Where is the spare wheel located on a Mercedes Vito? Read Answer
    • Vito 2003-2013 - Where is the spare wheel on the Mercedes Vito? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos