Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to lower the spare wheel of the Mercedes Vito

Model: Mercedes Vito MK 3, W447 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Wheel

Video tutorial

The instructions in this guide will show us how to lower the spare wheel, replacing it in case of a flat tire, of the Mercedes Vito. First, we open the rear door and start getting the replacement wheel kit; then we use the key provided to unscrew the spare wheel screw, lowering it from the platform, as shown in the video.

At this point, we lift the vehicle and unscrew the wheel bolts, replacing it with the spare one; we tighten the bolts in a cross pattern and finally reposition the entire kit in the rear compartment.


Posted on 20 September 2025 by ScegliAuto


Related tutorials

How to Remove the Spare Wheel from the Mercedes Vito
How to Remove the Spare Wheel from the Mercedes Vito
Mercedes Vito (2014-2024 / MK 3, W447) In this video, you can see how to access the spare wheel in the Mercedes Vito by following simple and effective steps. First, you should know that th…
Where is the spare wheel located on the Mercedes Vito?
Where is the spare wheel located on the Mercedes Vito?
Mercedes Vito (2003-2013 / MK 2, W639) On the Mercedes Vito, the spare wheel is located at the bottom of the vehicle, directly beneath the floor in the rear loading area: here you will fin…
How to Replace the Wheel on the Mercedes Vito
How to Replace the Wheel on the Mercedes Vito
Mercedes Vito (2003-2013 / MK 2, W639) First, you need to be aware of the risks associated with a flat tyre, as it can lead to aquaplaning and a subsequent road accident due to reduced bra…

How to reset the AdBlue warning light on the Renault Trafic?

If the AdBlue warning light on the Renault Trafic remains on even after refilling with the additive, it is possible that a programming error has occurred in the AdBlue management unit: this unit is located inside the engine compartment and must be removed and disconnected to perform a diagnosis. The unit must then be connected to the appropriate diagnostic tool so that all stored errors can be reset correctly; after the reset, reinstall the unit, ensuring everything functions correctly.

Watch the video!


by ScegliAuto

More videos