Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to open and repair the storage compartment of the Piaggio Liberty 125

Model: Piaggio Liberty 125
Part: Checks and maintenance

Video tutorial

These short and simple instructions will show us how to open and repair the storage compartment drawer of the Piaggio Liberty 125 scooter. First, we put the scooter on the center stand and start by opening the storage compartment located under the handlebars, by pressing on the ignition key cylinder; often this is a common issue on all these models, where a repair or direct replacement of the opening mechanism is carried out. It is possible to lock the opening of the storage compartment by turning the ignition key on the cylinder to the lock position.


Posted on 22 July 2025 by ScegliAuto


Related tutorials

How to replace the air filter of the Piaggio Liberty 125 - 50
How to replace the air filter of the Piaggio Liberty 125 - 50
Liberty 125 Follow these steps to remove and replace the air filter cartridge of the Piaggio Liberty 125 scooter, as well as the 50. First, place your scooter on…
How do you bleed the brakes on the Piaggio Liberty 125?
How do you bleed the brakes on the Piaggio Liberty 125?
Liberty 125 In order to bleed the brakes on the Piaggio Liberty 125, you will need to loosen the small drain plug located near the front and rear brake calipers.…
How do you replace the transmission of the Piaggio Liberty 125?
How do you replace the transmission of the Piaggio Liberty 125?
Liberty 125 In order to replace the transmission of the Piaggio Liberty 125, you need to loosen the screws that fix the cover located near the rear wheel, on the…

How to Change the Transmission Oil in the Honda SH 150i Scooter?

Changing the transmission oil in the Honda SH 150i scooter, as shown in this tutorial, is an extremely simple and quick operation. First, wait until the engine is cool enough, then locate the three bolts at the rear of the casing and position a container underneath them. Next, use a 12mm socket to remove the two inner bolts, allowing all the oil in the system to drain out, and then tighten the lower bolt. At this point, simply pour in the new oil through the upper hole, using a syringe and a thin tube if necessary.

Watch the video!


by ScegliAuto

More videos