Do it yourself
Frequently asked questions about cars and motorcycles

How to change the battery in a Mercedes Vito key remote

Model: Mercedes Vito - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Key

See other generations:
Video tutorial

To replace the battery in a remote for a Mercedes Vito, take the key and slide the small latch to extract the internal mechanical key. Insert a flathead screwdriver into the slot and pry open the remote casing. Once opened, locate the button battery inside, usually a CR2025, and remove it, taking care to note the polarity.

Insert the new battery in the correct orientation, then close the casing by pressing until it clicks into place. Reinsert the mechanical key and check the functionality by pressing the remote buttons.


Posted on 13 November 2026 by ScegliAuto


Related tutorials

Mercedes Vito (2014-2024 / MK 3, W447) Replacing the battery in a Mercedes Vito remote is a simple and quick task you can do yourself. To perform this operation, press the button on the ba…
Mercedes Vito (2003-2013 / MK 2, W639) In this tutorial, we will see how to replace the battery of the remote control for the Mercedes Vito van, a very simple and quick operation. To do th…
Mercedes Vito (1995-2003 / MK 1, W638) In this guide, we will see the instructions that will allow us to remove and replace the battery of the Mercedes Vito. First, open the left front doo…

How to Open the Fuel Door of the MG ZS?

To open the fuel door of the MG ZS, access the interior of the vehicle to locate the lever that unlocks the fuel door. This lever is located on the lower left side of the dashboard, near the steering column. Pull the lever to open the fuel door, allowing you to unscrew the cap underneath for refueling. After refueling, replace the fuel cap and securely close the fuel door.

Watch the video!


by ScegliAuto

More videos