Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Auxiliary Battery of the Mercedes Vito

Model: Mercedes Vito MK 3, W447 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Battery

See other generations:
Video tutorial

These brief and simple steps will show you how to remove and replace the auxiliary battery of the Mercedes Vito. First, open the sliding rear door on the driver's side and start by removing the plastic cover located at the bottom, thus accessing the auxiliary battery; then disconnect both battery terminals (positive and negative), remove it from its compartment, and replace it with the new one (of the correct type and with the same amperage), as shown in the video.

Once the new battery is connected, reattach the outer cover.


Posted on 12 September 2026 by ScegliAuto


Related tutorials

How to Replace the Auxiliary Battery on the Mercedes Vito
How to Replace the Auxiliary Battery on the Mercedes Vito
Mercedes Vito (2014-2024 / MK 3, W447) To replace the auxiliary battery on the Mercedes Vito, remove the cover from the lower part of the front passenger seat. Once removed, you will have …
How to Remove the Battery from a Mercedes Vito
How to Remove the Battery from a Mercedes Vito
Mercedes Vito (2003-2013 / MK 2, W639) Before starting, open the driver’s door of your Mercedes Vito. Begin by prising off and removing the side cover of the battery. Next, unscrew and loo…
How to Replace the Battery in the Mercedes Vito
How to Replace the Battery in the Mercedes Vito
Mercedes Vito (1995-2003 / MK 1, W638) In today's video, you will see how to replace the service battery in the Mercedes Vito. First, obtain the same unit specified in your vehicle's user …

    Frequently Asked Questions

    • Vito 2014-2024 - Where is the Mercedes Vito auxiliary battery located? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos