Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery in a Mercedes Vito

Model: Mercedes Vito MK 1, W638 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Battery

See other generations:
Video tutorial

These brief and simple steps will show you how to remove and replace the battery in a Mercedes Vito. First, locate the battery, which is positioned under the front passenger seat; then lift the seat to access the battery, removing the upper plastic cover as shown in the video.

At this point, disconnect both battery terminals (positive and negative), remove it and replace it with a new one; install the new original battery of the correct type and with the same amperage, then start the engine!


Posted on 1 April 2026 by ScegliAuto


Related tutorials

How to Remove the Battery from a Mercedes Vito
How to Remove the Battery from a Mercedes Vito
Mercedes Vito (2003-2013 / MK 2, W639) Before starting, open the driver’s door of your Mercedes Vito. Begin by prising off and removing the side cover of the battery. Next, unscrew and loo…
How to Change the Battery of a Mercedes Vito
How to Change the Battery of a Mercedes Vito
Mercedes Vito (1995-2003 / MK 1, W638) In this guide, we will see the instructions that will allow us to remove and replace the battery of the Mercedes Vito. First, open the left front doo…
How to Replace the Battery on a Mercedes Vito?
How to Replace the Battery on a Mercedes Vito?
Mercedes Vito (2003-2013 / MK 2, W639) To replace the battery on a Mercedes Vito, remove the plastic cover located on the left side immediately under the driver's seat. Once this panel is …

Other guides you may be interested in

    Frequently Asked Questions

    • Vito 2014-2024 - Where is the Mercedes Vito auxiliary battery located? Read answer

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos