Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery in the Mercedes Vito

Model: Mercedes Vito MK 1, W638 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Battery

See other generations:
Video tutorial

In today's video, you will see how to replace the service battery in the Mercedes Vito. First, obtain the same unit specified in your vehicle's user and maintenance manual. Next, locate the position of the battery; it is not found in the engine compartment but under the driver's seat.

Open the access panel and slide the seat forward, then tilt it using the appropriate lever to access the battery compartment. You can then disconnect the terminals in the correct order and proceed with the replacement.


Updated on 20 June 2026 by ScegliAuto


Related tutorials

How to Remove the Battery from a Mercedes Vito
How to Remove the Battery from a Mercedes Vito
Mercedes Vito (2003-2013 / MK 2, W639) Before starting, open the driver’s door of your Mercedes Vito. Begin by prising off and removing the side cover of the battery. Next, unscrew and loo…
How to Replace the Battery in a Mercedes Vito
How to Replace the Battery in a Mercedes Vito
Mercedes Vito (1995-2003 / MK 1, W638) These brief and simple steps will show you how to remove and replace the battery in a Mercedes Vito. First, locate the battery, which is positioned u…
How to Change the Battery of a Mercedes Vito
How to Change the Battery of a Mercedes Vito
Mercedes Vito (1995-2003 / MK 1, W638) In this guide, we will see the instructions that will allow us to remove and replace the battery of the Mercedes Vito. First, open the left front doo…

Other guides you may be interested in

    Frequently Asked Questions

    • Vito 2014-2024 - Where is the Mercedes Vito auxiliary battery located? Read answer

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos