Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Replace the Rear Bumper on Mercedes A-Class

Model: Mercedes Classe A W176 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Rear bumper

See other generations:
Video tutorial

These simple steps will show you how to remove and replace the rear bumper on a Mercedes A-Class. First, open the trunk lid and start removing the cargo area floor; inside, you will find the bumper screws, which you will unscrew as shown in the video.

Next, unscrew the additional fastening screws located on both sides of the rear wheel wells, gently pulling the bumper away from the sides until it is completely removed; finally, carry out the repair or replacement of the rear bumper and reassemble everything!


Posted on 29 May 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Bumper of a Mercedes A-Class
How to Remove the Rear Bumper of a Mercedes A-Class
Mercedes Classe A (2018-2026 / W177) .. you begin, lift the front of your Mercedes A-Class. Start by disconnecting and removing the clips securing the rear bumper. Next, unscrew and remove.. …
Removing the Rear Bumper of the Mercedes A-Class
Removing the Rear Bumper of the Mercedes A-Class
Mercedes Classe A (2004-2012 / W169) .. and replace the rear bumper of the Mercedes A-Class. First, open the trunk lid and start removing the interior trim of the floor, accessing the inside.. …
How to Remove the Rear Bumper of a Mercedes A-Class
Mercedes Classe A (2004-2012 / W169) .. you begin, open the trunk of your Mercedes A-Class. Start by removing the covers from the bolts that secure the bumper. Once done, proceed to unscrew.. …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos