Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Bumper of a Mercedes A-Class

Model: Mercedes Classe A W177 - Years 2018-2026
Part: Rear bumper

Before you begin, lift the front of your Mercedes A-Class. Start by disconnecting and removing the clips securing the rear bumper. Next, unscrew and remove the screws that attach the rear bumper to the frame, located around the perimeter of the bumper. Once you have removed the screws and clips, the rear bumper will be free. Proceed by disengaging and removing the bumper itself. After completing this step, the removal of the rear bumper from your Mercedes A-Class will be finished.

Updated on 19 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove and Replace the Rear Bumper on Mercedes A-Class
How to Remove and Replace the Rear Bumper on Mercedes A-Class
Mercedes Classe A (2012-2018 / W176) .. and replace the rear bumper on a Mercedes A-Class. First, open the trunk lid and start removing the cargo area floor; inside, you will find the bumper.. …
How to Remove the Rear Bumper from the Mercedes-Benz A-Class?
Mercedes Classe A (2004-2012 / W169) .. remove the rear bumper from the Mercedes-Benz A-Class, you need to unscrew the screws located inside the wheel wells of the rear wheels so that they.. …
How to dismantle the bumper of the Mercedes A-Class
Mercedes Classe A (2012-2018 / W176) .. how to replace the rear bumper of the Mercedes A-Class. To remove the bumper, you need to lift the car using a lift or a jack, after lifting the car you.. …

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos