Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Rear Bumper of a Mercedes A-Class?

Model: Mercedes Classe A W169 - Years 2004-2012
Part: Rear bumper

Before you start, open the trunk of your Mercedes A-Class. Using a flathead screwdriver, pry off and remove the covers for the bolts that secure the bumper to the frame. This will expose all the bolts holding the bumper in place. Next, unscrew and remove these bolts. At this point, you can slide the bumper out of its housing. Once you complete this step, you can fully remove it, successfully finishing the disassembly.

Updated on 5 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Mercedes Classe A (2018-2026 / W177) .. you begin, lift the front of your Mercedes A-Class. Start by disconnecting and removing the clips securing the rear bumper. Next, unscrew and remove.. …
Mercedes Classe A (2004-2012 / W169) .. you begin, open the trunk of your Mercedes A-Class. Start by removing the covers from the bolts that secure the bumper. Once done, proceed to unscrew.. …
Mercedes Classe A (2004-2012 / W169) .. remove the rear bumper from the Mercedes-Benz A-Class, you need to unscrew the screws located inside the wheel wells of the rear wheels so that they.. …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos