Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Vito
    4. : Car stereo

Mercedes Vito - Car stereo

Mercedes Vito (2014-2024 / MK 3, W447)
How to install a car radio on a Mercedes Vito W 447 from 2022.
Installing the car stereo of the 2022 Mercedes Vito W 447 is a very simple operation, and with the help of this short video tutorial, we will explain all the …read all…
Posted on 9 November 2023 by ScegliAuto
Mercedes Vito (2003-2013 / W639, MK 2)
Removal of the Mercedes Vito car radio
In this short and simple guide we will see how to disassemble and replace the standard car radio of the Mercedes Vitò, following the instructions below. First …read all…
Posted on 27 April 2023 by ScegliAuto
Mercedes Vito (2003-2013 / W639, MK 2)
What is the radio fuse in the Mercedes Vito van?
In the event that the car radio of our van Mercedes Vito suddenly stops working, the first thing we can do is check the state of the respective fuse whose …read all…
Posted on 23 April 2023 by ScegliAuto
Mercedes Vito (2003-2013 / W639, MK 2)
How to disassemble the car radio of a Mercedes Vito
Before we can begin, we will have to go and sit in the driver's seat of our Mercedes Vito. Using a thin but strong tool and prying, let's start by removing the …read all…
Posted on 9 January 2024 by ScegliAuto
Mercedes Vito (2003-2013 / W639, MK 2)
How to disassemble the car radio on a Mercedes Vito Viano
Let's see how to disassemble the original car radio on a Mercedes Vito Viano. First of all we remove the car radio frame with a plastic lever, then, with the …read all…
Posted on 16 October 2023 by ScegliAuto
Shock absorbers (1) Car stereo (5) Battery (8) Arm (1) Glow plugs (1) Glove box (1) Key (2) Timing belt (1) -board computer (6) Checks and maintenance (35) Dashboard (3) Headlight (6) Tail light (1) Cabin air filter (4) Diesel filter (2) Grille (1) Light bulb (1) Headlight bulb (1) Rear light bulb (1) Antifreeze liquid (1) Handle (3) Window motor (1) Door panel (4) Tires (1) Door (2) Push button (1) Instrument cluster (8) Wheel (4) Fuse box (31) Seat (4) Outside rearview mirror (1) Windscreen wipers (1) Thermostat (1) Valve (1) Interior blower (1) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos