Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the car radio in the Mercedes Benz Vito W447?

Model: Mercedes Vito MK 3, W447 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Car stereo

See other generations:
Video tutorial

Over the years and with technological progress, the equipment of cars at the time of purchase will obviously become obsolete. It is legitimate to want to update this equipment and it is not always laborious and expensive, especially if, as shown in the attached video guide regarding the car radio, you intervene personally.

The first step is to remove the frame of the car radio, then unscrew the four fixing pins and finally extract it from its seat, being able to disconnect the various rear connectors. Now we connect these to the new equipment and the job is done.


Posted on 10 April 2025 by ScegliAuto


Related tutorials

How to Remove the Driver's Door Handle of the Mercedes Benz Vito V250 w447
How to Remove the Driver's Door Handle of the Mercedes Benz Vito V250 w447
Mercedes Vito (2014-2024 / MK 3, W447) This guide shows how to remove the external handle of the driver's door of the Mercedes Benz Vito V250 w447. The first step is to remove the cap from…
Where is the OBD2 Port on the Mercedes Vito W447?
Where is the OBD2 Port on the Mercedes Vito W447?
Mercedes Vito (2014-2024 / MK 3, W447) If you are curious about the location of the OBD2 port on your Mercedes Vito W447, simply read the following guide carefully and follow all the descr…
Replacement of the factory radio in the Mercedes Vito
Replacement of the factory radio in the Mercedes Vito
Mercedes Vito (2014-2024 / MK 3, W447) Today we will discover the instructions that will allow us to dismantle and replace the stock radio of the Mercedes Vito. First, let's get inside the…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos