Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the car radio on a Mercedes Vito W639

Model: Mercedes Vito MK 2, W639 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Car stereo

See other generations:
Video tutorial

We can see in this timelapse how to remove the factory radio from the Mercedes Vito W639 and install one with a touch-screen. We start by removing the trim around the device, which is inserted by pressure and can be removed with a plastic spatula to avoid scratching the interior.

Once we have removed this and exposed the four screws holding the radio in place, we unscrew them and remove the device, disconnecting the electrical connectors behind it. We do not provide instructions for the device, as there are many on the market for all tastes and budgets, each with its own wiring that needs to be inserted before the screen - as we can see - and then we insert the device with its antenna, put back the trim and the job is done.


Posted on 16 January 2025 by ScegliAuto


Related tutorials

How to Remove the Radio from a Mercedes Vito
How to Remove the Radio from a Mercedes Vito
Mercedes Vito (2003-2013 / MK 2, W639) Before you can begin, sit in the driver's seat of your Mercedes Vito. Using a thin but sturdy tool to pry, start by removing the trim surrounding the…
How to replace the airbag of the Mercedes Vito W639
How to replace the airbag of the Mercedes Vito W639
Mercedes Vito (2003-2013 / MK 2, W639) In this video we can see how to replace the airbag module of the Mercedes Vito: to remove it from its housing we need to insert two small screwdriver…
How to Remove the Turbo on a Mercedes Vito W639
How to Remove the Turbo on a Mercedes Vito W639
Mercedes Vito (2003-2013 / MK 2, W639) The video here demonstrates how to carry out the work mentioned on a Mercedes ML, but the procedure is identical for the Mercedes Vito W639. Lift the…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos