Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mercedes
  4. :
  5. Vito
  6. : Blower motor

Mercedes Vito - Blower motor

Blower Motor Mercedes Vito (2003-2013 / mk 2, w 639)

Mercedes Vito (2003-2013 / MK 2, W639)
How to Replace the Cabin Fan on a Mercedes Vito W639

The cabin fan of the Mercedes Vito W639 is easily accessible from the cabin. Simply remove the screws from the large cover located beneath the dashboard and …Read all…
Posted on 24 April 2026 by ScegliAuto
Mercedes Vito (2003-2013 / MK 2, W639)
How to disassemble the cabin fan of the Mercedes Vito

Today's main information will allow us to dismantle and replace the cabin fan of the Mercedes Vito. First, we get on board the vehicle and start removing the …Read all…
Posted on 17 September 2025 by ScegliAuto
Mercedes Vito (2003-2013 / MK 2, W639)
How to Remove the Cabin Fan from a Mercedes Vito?

The cabin fan of this fantastic Mercedes MPV is located in the centre of the dashboard, just above the air vents of the central console, where a glove …Read all…
Posted on 22 March 2026 by ScegliAuto

Airbag (1) Shocks (1) Car stereo (11) Anti-roll bar (1) Battery (15) Control arm (1) Glow plugs (1) Glove compartment (1) Key (7) Trunk lock (1) Timing belt (1) V-belt (1) Checks and maintenance (15) Dashboard (4) MAF sensor (1) Rear bench seat (2) Headlight (9) Tail light (2) Air filter (3) Cabin air filter (7) Diesel fuel filter (3) Grille (1) Light bulb (2) Headlight bulb (7) Tail light bulb (5) Antifreeze coolant (1) Handle (5) Power window motor (2) Brake fluid (1) Engine oil (7) Clock (25) Door trim panel (10) Tires (1) Shift knob (4) Pump (1) Car door (6) Push button (1) Power window switch (1) Instrument cluster (2) Wheel (8) Fuse box (79) Seat (7) Suspension system (1) Side mirror (3) AdBlue warning light (9) Warning light – error code (11) Tire pressure warning light (7) Service warning light (103) Windshield wipers (3) Thermostat (1) Drivetrain (1) Turbocharger (1) Valve (1) EGR valve (1) Blower motor (3) Steering wheel (2)

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos