Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Cabin Fan from a Mercedes Vito?

Model: Mercedes Vito MK 2, W639 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Blower motor

See other generations:
Video tutorial

The cabin fan of this fantastic Mercedes MPV is located in the centre of the dashboard, just above the air vents of the central console, where a glove compartment is situated; start by opening and removing this glove compartment, then remove the plastic coverings that enclose the fan and the associated resistor that regulates its speed; you will notice that the fan consists of a central motor and two fans installed at both lateral ends: you will need to pull out the entire unit and then proceed in reverse for reassembly.


Updated on 5 March 2026 by ScegliAuto


Related tutorials

How to disassemble the cabin fan of the Mercedes Vito
How to disassemble the cabin fan of the Mercedes Vito
Mercedes Vito (2003-2013 / MK 2, W639) Today's main information will allow us to dismantle and replace the cabin fan of the Mercedes Vito. First, we get on board the vehicle and start remo…
How to Replace the Cabin Fan on a Mercedes Vito W639
How to Replace the Cabin Fan on a Mercedes Vito W639
Mercedes Vito (2003-2013 / MK 2, W639) The cabin fan of the Mercedes Vito W639 is easily accessible from the cabin. Simply remove the screws from the large cover located beneath the dashbo…
How to Remove the Battery from a Mercedes Vito
How to Remove the Battery from a Mercedes Vito
Mercedes Vito (2003-2013 / MK 2, W639) Before starting, open the driver’s door of your Mercedes Vito. Begin by prising off and removing the side cover of the battery. Next, unscrew and loo…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos