Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mercedes
  4. :
  5. Vito
  6. : Tail light

Mercedes Vito - Tail light

Tail Light Mercedes Vito (2014-2024 / mk 3, w 447)

Mercedes Vito (2014-2024 / MK 3, W447)
How to Remove the Rear Light from the Mercedes Vito?

To remove the rear light from the Mercedes Vito, open the rear tailgate to access the screws located next to the light cluster: once these screws are loosened, …Read all…
Posted on 1 March 2026 by ScegliAuto
Mercedes Vito (2014-2024 / MK 3, W447)
Replacing the Rear Light and Bulbs on the Mercedes Vito

In this brief and simple guide, follow the steps to remove and replace the rear light and its bulbs on the Mercedes Vito. First, go to the rear and open the …Read all…
Posted on 10 August 2026 by ScegliAuto

Airbag (1) Shocks (1) Car stereo (11) Anti-roll bar (1) Battery (15) Control arm (1) Glow plugs (1) Glove compartment (1) Key (7) Trunk lock (1) Timing belt (1) V-belt (1) Checks and maintenance (15) Dashboard (4) MAF sensor (1) Rear bench seat (2) Headlight (9) Tail light (2) Air filter (3) Cabin air filter (7) Diesel fuel filter (3) Grille (1) Light bulb (2) Headlight bulb (7) Tail light bulb (5) Antifreeze coolant (1) Handle (5) Power window motor (2) Brake fluid (1) Engine oil (7) Clock (25) Door trim panel (10) Tires (1) Shift knob (4) Pump (1) Car door (6) Push button (1) Power window switch (1) Instrument cluster (2) Wheel (8) Fuse box (79) Seat (7) Suspension system (1) Side mirror (3) AdBlue warning light (9) Warning light – error code (11) Tire pressure warning light (7) Service warning light (103) Windshield wipers (3) Thermostat (1) Drivetrain (1) Turbocharger (1) Valve (1) EGR valve (1) Blower motor (3) Steering wheel (2)

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos